ProCodeCG Kids Regular Coding Class – 20 Oct 2018

Today most of us are preparing for the upcoming exhibition event 🙂

Al has successfully finished a shooting game in GameMaker today 😉

He created an awesome game with awesome sprites and animation 🙂

Capt. Awa helped Al to improve the game

Totally awesome 🙂

Agham is making a lot of progress in GameMaker Studio 2 🙂

Agham has completed Tutorial #1

Yes, Agham can make a game using this complex workspace and hundreds of icons

Farrel has just started GameMaker and keep up with the class very well 🙂

Capt. Fizhan gave Farrel’s game a try 😉

Harraz did his homework: upgrading his maze game by adding levels and more features 🙂

Now Harraz has to make a shooting game 🙂

Fadhlan had to optimize the robot for the exhibition and the next level of competition

But he said he wanted to measure the voltage of himself LOL

Fadhlan’s working space 😀

Capt. Awa is assigned to help Edo preparing the project for exhibition 😉

The driver just won’t work

Salman finally joined Edo to help Edo with wiring and driver 😀

Still not working. We’ll try again next class 🙂

Raihan is also under supervision of Capt. Awa 😉 He’s supposed to make a project with LCD today 🙂

The schematic

Sam is working so seriously on the PVZ game because this one is going to be presented on the upcoming exhibition

Salman is ready for anything 🙂 He is given a test on intro to computer security 🙂

Koosha’s Safe Box is ready for the exhibition.

 

Now Koosha is working on another project 😉

Koosha’s new project. Halfway done. Can anybody guess what is the project? 😀 😀 D

Koosha is testing the temperature and humidity sensor and display it to a TFT display

Ok they work just fine

Now testing the lamp and the fan. Work fine

Koosha’s fuel: fried tempe 😀 😀 😀

Now testing the whole circuit

ok all is working well

But it doesn’t work as we expected. The fan is supposed to be on when the temperature is higher than 25C and the lamp should be on when the temperature is lower than 20. When the temperature is between 20 – 25C, both should be off. We still need to work on this one.

Capt. Faris is making a math game app with Android Studio

There we go: a math game prototype by Capt. Faris 😉

We have a newcomer girl: Nadhira 🙂

Nadhira has to go through programming intro 🙂

Then Nadhira learned GameMaker 🙂

Some brotherhood in the class 😀

Capt. Syahna is busy reading a book and doing homework 😀

So many things happen in one class, but one we always make sure is that the kids are happy each time 😉 Until next week! 😉

*Photos and videos are also available here

Advertisement

ProCodeCG – Darul Hikam – Coding Class – 19 Oct 2018

Friday is always awesome because of these kids 🙂

Hanif gained more skills in GameMaker Studio 2. He went through all he had been learning in GameMaker and reapplies it using GMS 2. The progress is awesome 🙂

Capt. on duty: Capt. Bullit 😉

Capt. Bullit assisting Danen and Faisal to create a RGB LED circuit

Isma’ill is ready to create a new game

Shaby missed the last class so he had to catch up 🙂

Shaby’s shooting game in the making

Arsa moved on to create shooting game

He had created the Race Car Game and lost it several times so we decided to move on to the next

Daffa is working on the shooting game too

Daffa had finished the Racing Car Game

Daffa’s shooting game

Faisal had finished the shooting game last week 🙂 He wanted to add some improvements

Danen learned some basic electronics like usual

Danen worked in team with Faisal 🙂

Hana planned to create a Mr. Baldy Game 😀

Andra is so excited to continue his Maze Game

Khalis is also creating a Mr. Baldy Game 🙂

Captain on duty afterwork 🙂 Got his hands full, ready to leave after making sure  nobody leave anything behind and we don’t leave the class messy 🙂

*Photos and videos are also available here

ProCodeCG Kids Homeschool Coding Class – 18 Oct 2018

Always glad to have this kids come back to learn 🙂 Kinan didn’t feel well, so we had these boys and one little girl in this class today 🙂

Abiel wanted to continue his Baldy Game today

Abiel searched some references for his game, including the sounds

 

Halfway to go, Abiel, now create the room 🙂

For the next milestone, Abiel has to type in codes and he hasn’t finished yet. Will continue this the next class 😉

Abiel had finished a milestone of the game that we called: Mr. Baldy Hide and Seek 😀 And Aisha loves to play it 😀

 

While Justin still had lots of things he wants to improve 😉

Justin didn’t like to see his sprites being trimmed on the edge of the screen (things that most people won’t notice :D)

This shows how detail Justin is doing his work: he created 16 images for one sprite to make it animate smoothly 🙂

so Justin decide to rearrange the whole thing and change the wall sprites and layout

Now everything is just like Justin wanted 🙂

it’s because Justin created different wall sprites for the corners, the uppers, the lowers and those on the left and the right sides, oh my 😀

aaanddd we had a guest: Aisha, Abiel’s little sister 🙂

This little one was doing her homework 🙂

Aisha’s mom taught her some reading using cards

*Photos and videos are available here

 

ProCodeCG – BDV – Intermediate Data Analysis with Python – Day #3

Day #3, start using natural language toolkit and then analyse the summary 😉

ProCodeCG Kids Regular Coding Class – 13 Oct 2018

This is one of the reasons why we like weekends so much, especially Saturday morning! 😉

Fauzan was now ready to learn GameMaker 🙂

Fauzan started creating sprites

Koosha came with his Safe Box project

It will open if you enter the correct password. After 3 failed attempts it will beep 😀

The locking system uses a micro servo 🙂 Very creative 🙂

Koosh modified the code so that after beeping the box will be ready to accept input again

The inner view: looks like a mini CPU 😀

The mess 😀

The next project is thermostat 🙂 The lamp will turn on if the temperature is cold and the fan will turn on if the temperature is hot 😉

Ok the LCD and the temperature and humidity sensor are working nicely

Koosha and tempe ;D

The temperature and humidity sensor is working

Agham was very happy to learn GameMaker Studio 2 🙂

 

 

Capt. Faris helped Agham getting start with GameMaker Studio 2

Agham’s first game in GameMaker Studio 2 😉

Edo, learned some cybersecurity topic today 🙂

Edo had to solve quizzes and problems related to cyber security 🙂

Sam is constantly making progress of his PVZ game 🙂

When Sam is thinking hard, everything is possible 🙂

Sam figures out the problems one by one and keep improving the game

Our shy newcomer: Raihan 🙂

Raihan joined the class to learn basic electronics and robotics 🙂

Raihan’s first project 🙂

A teamwork of Edo and Raihan 😉

And yeaaay it worked 😉

The next project is ultrasonic sensor

Circuit testing

The long time no see: Aidia 🙂 Welcome back, girl! 🙂

Aidia wanted to learn some Minecraft today 🙂

Our funky engineer: Fadhlan 🙂 Seems like all the mess is following wherever he goes 😀

We’re going to improve the robot to be able to move smoother and more precisely

Testing the robot

The micro servo is not working, Fadhlan had to check every wire and every component

Hello Mohan, glad to see you again 🙂

Mohan started creating a new game 🙂

It’s time for Vian to learn GameMaker Studio 2 🙂

 

 

 

As usual, Ozan is always given a job to test circuits 🙂 Today the task is to test 3 ultrasonic sensor 😉

 

 

 

It is ready!

But the reading wasn’t correct

Capt. Faris fixed the serial speed and the readings are now ok! Great job Ozaaaan! 🙂

So proud of these kids! They are so productive! 🙂

*Photos and videos are also available here

ProCodeCG – Darul Hikam – Coding Class – 12 Oct 2018

Hey hello it’s us again 🙂

Raees had finished his RaceCar Game so he moved on to shooting game 🙂

this guy is supposed to shoot apples

or tomatoes? 🙂

Ezhar improved his game and learned some new tricks to add more features to it 🙂

He’s getting used with GameMaker Studio 2 toolbar now 🙂

He can now add more things with different actions just to how they would work 🙂

Seems like now Ezhar combined two games together 😀

Arsa had lots of ideas today

He’s drawing lots of characters for his RaceCar Game

Including this guy 🙂

And this is the background

Daffa finished his RaceCar Game today

He added the feature one by one

Adding points

Adding scores. We will probably add lives and fuel status next class 🙂

Hanif made lots of progress today

As usual he teamed up with Ezhar

Hanif has been remaking his previously games made with GameMaker Lite, now with GameMaker Studio 2. He found out that GameMaker Studio 2 has much more features and options

Captain on Duty: Capt. Awa

He’s ready to help those who have problems 😉

Danen wasn’t in the mood to be in a pic 😀

He’s got works to do 😉

Faisal finished his shooting game 🙂

Simple sprites

But awesome result 😉

Khalis

Khalis modify the existing RaceCar Game

Modifying is another way of learning before we can start our own 🙂

Hana started to create her RaceCar 🙂

She was very excited but it took some time to draw the sprites 😉

Ozi got huge progress today!

Lots of sprites, lots of features, lots of levels!

A very nice game Ozi!

Very proud of these kids, can’t wait to see them again the next class 🙂

*Photos & videos are also available here

 

 

 

 

ProCodeCG Kids Homeschool Coding Class – 11 Oct 2018

Hello ProCodeCG Homeschool Kids 🙂

Abiel decided to start another game because he forgot to save the work from the last time

Abiel created lots of sprites until his hands hurt 😀

Next time he had to bring mouse 🙂

Kinan forgot to bring laptop and charger so we had to install GameMaker Studio 2 on the other laptop and did something else while waiting for download and installation process 😀

Kinan learned coding by designing Google Logo 😉

Kinan tried lots of things to modify, give effects or animate every character 🙂

Justin is still persistency working on the Maze Game

 

The game is getting more real and of course, more complex 😉

 

Justin added some animation to the game 🙂

It is so interesting to see the progress week by week 🙂 They’ll be given different challenge next class 🙂

 

*Photos and videos are also available here

ProCodeCG Kids – Fadhlan – Young Scientist Competition 2018

So proud that one of ProCodeCG Kids can make it to the final of Young Scientist Competition 2018 🙂

Day #1

Day #2

Exhausted after a long night LOLLLL

But all the hard work paid off!

 

Congrats Fadhlan! We’re so proud of you!!! 🙂 ❤ ❤ ❤

ProCodeCG Kids Private Robotic Class – 10 Oct 2018

Yessss, we’re going to final!!!

That means after a long day of presentation and demo, Fadhlan still have to work overtime to test and improve the robot to make sure it works perfectly tomorrow 🙂

And it worked nicely, successfully avoiding every obstacle in its sensor height range

We tested the robot many times with different obstacles setting, and different source of power too

Yep, finally we’re so ready for tomorrow!

Wish us luck for the final of Young Scientist Competition tomorrow 😉

*Photos and videos are also available here

ProCodeCG Kids Private Robotic Class – 9 Oct 2018

The competition will started the day after so we really had to finish the robot 🙂

Basically we had everything covered, only still couldn’t decide how many volts we are going to use 😀

We have been experimenting with 6V, 9V, 12V, etc. using different kind of batteries 🙂

 

The little brother was there too to support his brother 😉

 

Fadhlan got all the support he needed from the family 🙂 The mom was there too 😉 Wishing all goes well tomorrow!

*Photos and videos are also available here