ProCodeCG Kids Private Robotic Class – 13 Nov 2018

Standard

3 days before the competition! Loads of things to do 🙂

IMG_8661

The letter that make us so proud 😉 Our research 😉

IMG_8659

Today Fadhlan is going to load all those stuff on top of the robot 🙂

IMG_8660

We use velcro to stick the batteries to the robot

IMG_8664

Okay it’s now ready for testing

IMG_8666

We tested ultrasonic sensor, micro servo, button, buzzer and the button, and the motor of course 😉

IMG_8668

IMG_8672

the button working fine

IMG_8673

the button and the ultrasonic and the LED and the buzzer are okay

IMG_8675

Okay the components and the code is working well! Going to do more tests tomorrow! 🙂

IMG_8676

*Photos and videos are also available here

Advertisements

ProCodeCG Kids Private Robotic Class – 12 Nov 2018

Standard

We’re having a competition in 4 days!

IMG_8607

Today we will upgrade the robot and add more components to add features to it

IMG_8608

Meaning that Fadhlan had to take off the components from the robot and rewire all

IMG_8609 IMG_8610

We need bigger breadboard! 😉

IMG_8611

There we go. After putting the components on the new breadboard, the next thing is to figure out how to put the breadboard on the robot 😀

IMG_8612

with all the cables and all 😀

IMG_8613

Look at this LOL

IMG_8614

The best we can do today 😀 Will work on it again tomorrow 😉

IMG_8616

*Photos and videos are also available here

ProCodeCG Kids Private Robotic Class – 1 Nov 2018

Standard

We’re preparing for upcoming festival and another round of competition 🙂

IMG_7800

We have to test the robot and make sure it works perfectly and then added more features and optimize it

IMG_7802

We got lots of ideas but we have to sort them and use the most feasible ones

IMG_7805

IMG_7807

Photos and videos are also available here

ProCodeCG Kids Private Robotic Class – 9 Oct 2018

Standard

The competition will started the day after so we really had to finish the robot 🙂

IMG_6168

Basically we had everything covered, only still couldn’t decide how many volts we are going to use 😀

IMG_6170

We have been experimenting with 6V, 9V, 12V, etc. using different kind of batteries 🙂

 

IMG_6172

The little brother was there too to support his brother 😉

IMG_6173 

Fadhlan got all the support he needed from the family 🙂 The mom was there too 😉 Wishing all goes well tomorrow!

IMG_6175

*Photos and videos are also available here

ProCodeCG Kids Private Robotic Class – 27 Sept 2018

Standard

Hardwork afterschool 🙂

IMG_5404

The robot was ready and the code was all set and uploaded but apparently the structure was not strong enough so Fadhlan needed to secure all the joints and connector to make it sturdier when it wanders around avoiding obstacles

IMG_5406

We also needed to add power source for the motor, that meant we had to shop more components and the re-assembling process can be done after all the components arrived

IMG_5407

The code is all set. After the robot is ready we’re going to do some testing and measurement to make tables and graphics and put it in our poster

Screen Shot 2018-10-01 at 13.52.34

The time is running thin, wish us luck!

*Images and videos are also available here

ProCodeCG Kids Private Robotic Class – 8 Aug 2018

Standard

Our private class on robotics, very desperately needed to catch up with the upcoming ProCodeCG Kids Coding Exhibition 🙂

IMG_2035

Fadhlan has got to work hard with the hardware

IMG_2036

and the software 😀

IMG_2038 IMG_2040

Some fuel is needed too 😀

IMG_2043

We have finished the code

IMG_2044

Now testing it and connect it to the robot

IMG_2045 1 IMG_2046 1

IMG_2047

There are still many things to debug because the robot wouldn’t move 😀 We should check all the wiring and connections on the next private class 🙂

*Photos and videos are available here